Исследовано специфическое воздействие мелкодисперсных примесных дефектов и лазерной обработки на образцах анизотропной Fe - 3 % Si стали. Определены оптимальные условия повышения температурной устойчивости зон локальной лазерной обработки стали. В результате комплексного воздействия лазерной обработкой, мелкодисперсными Mg-P-В дефектами внедрения и ТМО достигнуто снижение магнитных потерь на 17-19 % в электротехнической стали и на 30 % в аморфной ленте сплава FeSi4В13С2. При последующих технологических отжигах с температурой ~600-700 °С в сплаве сохраняется не менее половины эффекта снижения магнитных потерь, достигаемого лазерным воздействием. Это открывает перспективы снижения магнитных потерь в магнитомягких сплавах и получения магнитных материалов с высоким уровнем физико-механических свойств, более устойчивых к условиям эксплуатации. The specific effect of finely dispersed impurity defects and laser processing on samples of anisotropic Fe - 3 % Si steel has been investigated. Optimum conditions for increasing the temperature stability of the zones of local laser processing of steel are determined. As a result of the complex effect of laser treatment, fine-dispersed Mg-P-B penetration defects and TMO, the reduction of magnetic losses by 17-19 % in electrical steel and 30 % in the amorphous ribbon of FemSi4Bl3C2 alloy is achieved. With subsequent technological annealing at a temperature of ~600-700 ° C, at least half of the effect of reducing the magnetic losses achieved by laser action is retained in the alloy. This opens the prospect of reducing magnetic losses in magnetically soft alloys and obtaining magnetic materials with a high level of physicomechanical properties that are more resistant to operating conditions.